CARBONKOUS 80 MM LM

3125

Nieuw product

Diameter: from 44-129 mm
Thickness: approx. 0.44 mm

Technical data at 45° braid angle:
Diameter: 80mmæ
Width flat: 129 mm
Weight: 48.7 g/m

Application:
Torsion-proof pipes of various diameters e.g. for sports equipment construction. The sleeve diameter can be varied by clenching or stretching. Delivered in stretched condition.

Processing: 
Use plenty of R&G release spray on core material (slide coating) and allow to dry. Pass sleeve over material and pull both ends for proper fit – fit under tension if necessary. Apply resin with a brush. The area to be processed can be warmed using a hairdryer if required. This will liquify the resin and impregnate the fibre quickly and safely. (Do not forget resin fumes – ensure that the room is well aired or wear a protective mask.) The core is gripped following hardening and the pipe removed. Small size components may be pre-frozen. In this way it is easier to remove the shrunken metal core.      

Meer details

22,23 €
18,37 € BTW excl.

- +

 
Meer informatie

Diameter: from 44-129 mm
Thickness: approx. 0.44 mm

Technical data at 45° braid angle:
Diameter: 80mmæ
Width flat: 129 mm
Weight: 48.7 g/m

Application:
Torsion-proof pipes of various diameters e.g. for sports equipment construction. The sleeve diameter can be varied by clenching or stretching. Delivered in stretched condition.

Processing: 
Use plenty of R&G release spray on core material (slide coating) and allow to dry. Pass sleeve over material and pull both ends for proper fit – fit under tension if necessary. Apply resin with a brush. The area to be processed can be warmed using a hairdryer if required. This will liquify the resin and impregnate the fibre quickly and safely. (Do not forget resin fumes – ensure that the room is well aired or wear a protective mask.) The core is gripped following hardening and the pipe removed. Small size components may be pre-frozen. In this way it is easier to remove the shrunken metal core.      

Schrijf uw recensie

CARBONKOUS 80 MM LM

Diameter: from 44-129 mm
Thickness: approx. 0.44 mm

Technical data at 45° braid angle:
Diameter: 80mmæ
Width flat: 129 mm
Weight: 48.7 g/m

Application:
Torsion-proof pipes of various diameters e.g. for sports equipment construction. The sleeve diameter can be varied by clenching or stretching. Delivered in stretched condition.

Processing: 
Use plenty of R&G release spray on core material (slide coating) and allow to dry. Pass sleeve over material and pull both ends for proper fit – fit under tension if necessary. Apply resin with a brush. The area to be processed can be warmed using a hairdryer if required. This will liquify the resin and impregnate the fibre quickly and safely. (Do not forget resin fumes – ensure that the room is well aired or wear a protective mask.) The core is gripped following hardening and the pipe removed. Small size components may be pre-frozen. In this way it is easier to remove the shrunken metal core.      

Schrijf uw recensie

 
Comments(0)

Geen klantenbeoordelingen op het moment.

7 Andere producten in dezelfde categorie

Menu

Compare 0