Scales (digital pocket scales) 0.1 g to 600 g These digital pocket scales weigh up to 600 g in 0.1 g graduations and yield precise results owing to their high-quality measuring technology. One innovation is the blue...
SILICONE ZA 35 GEEL a+b 2KG A+B
ZA 35 MOULD is a bi-component addition cured RTV silicone rubber which vulcanizes at room temperature
Compatible with all plasters, coatings, polyurethane resins and acrylic resins.
Compatible with all plasters, coatings, polyurethane resins and acrylic resins.
Main application sectors
- Mouldmaking and model-making due to its considerable precision in reproduction, high dimensional stability and high mechanical resistance
- Artistic ceramics due to its high dimensional stability, considerable fluidity
€ 158,80
(incl. btw)
Reference:
3892
Accessoires
€ 5,00
(incl. btw)
Mengstokjes in hout 15 cm lang. Om kleine hoeveelheden hars te mengen .In een doos van 100 stuks verpakt
€ 1,37
(incl. btw)
Kunststof mengbeker met schaalverdeling bestand tegen solventhoudende harsen.
500 ML inhoud .Zonder deksel
€ 7,88
(incl. btw)
INTACTO nitril handschoenen XL – latexvrij, poedervrij en scheurbestendig. Ideaal voor medische, industriële en huishoudelijke toepassingen. 100 stuks per doos.
ZA 35 MOULD is a bi-component addition cured RTV silicone rubber which vulcanizes at room temperature
Compatible with all plasters, coatings, polyurethane resins and acrylic resins.
Compatible with all plasters, coatings, polyurethane resins and acrylic resins.
Main application sectors
- Mouldmaking and model-making due to its considerable precision in reproduction, high dimensional stability and high mechanical resistance
- Artistic ceramics due to its high dimensional stability, considerable fluidity
Chemical and physical characteristics
| Metric system | USA system | |
| Mixing ratio | 1 : 1 | - |
| Density | 1.18 g/cc | - |
| Viscosity of the mix pre-catalisation | 4100 ± 300 cP | - |
| Mixing time at 23 °C (73 °F) | 1' | - |
| Working time at 23 °C (73 °F) | 12’ - 15’ | - |
| Setting time at 23 °C (73 °F) | 1 h | - |
| Hardness Shore-A after 24 hours | 35 ± 2 ShA | - |
| Tensile strenght | 3.0 ± 0.2 N/mm² | 435 ± 29 psi |
| Elongation at break | 300 ± 20% | - |
| Tear resistance (Die B) | 7 ± 1 N/mm | 40 ± 6 ppi |
| Tear resistance (Die C) | 9 ± 1 N/mm | 51 ± 6 ppi |