ZA 22 MOULD is a bi-component addition cured RTV silicone rubber which vulcanizes at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts.
| Metric system | USA system | |
| Mixing ratio | 1 : 1 | - |
| Viscosity of the mix pre-catalisation | 4000 ± 300 cP | - |
| Mixing time at 23 °C (73 °F) | 1' | - |
| Working time at 23 °C (73 °F) | 14’ - 17’ | - |
| Setting time at 23 °C (73 °F) | 1 h | - |
| Hardness Shore-A after 24 hours | 21 ± 2 ShA | - |
| Tensile strenght | 4.0 ± 0.2 N/mm² | 581 ± 29 psi |
| Elongation at break | 380 ± 20% | - |
| Tear resistance (Die B) | 20 ± 1 N/mm | 113 ± 6 ppi |
| Tear resistance (Die C) | 12 ± 1 N/mm | 68 ± 6 ppi |
Please sign in first.
Sign in
