WIPING FILLER FOR PINHOLES BLACK 250GR

Application:
Black wiping filler for porous CFRP-surfaces (to seal pinholes)

Technical data:
Density: approx. 1.83 g/cm³
Thinner: on demand with acetone 
Drying/curing: could be wiped off at 20 °C in 20 minutes, at 40 °C in 10 minutes

Processing:
Apply with a cotton cloth or sponge. Surfaces to be coated must be clean and sanded before with 240 grit sandpaper.

Don´t use solvents to clean the treated surface, only use compressed air and an anti-static cloth to remove the “abrasive dust”. 

Then paint with double coat double UV of 2k Varnis 

Storage: 12 months at +10 up to +30 °C